Carbon steel plate can also be called plain carbon steel or carbon
steel, in addition to carbon, it contains a small amount of
silicon, mananese, sulfur, phosphorus and other elements, the
higher the carbon content, the better the hardness and stength, but
the worse the plasticity.
With carbon content from about 0.05% ~ 2.1% by weight, it is
divided into four classes based on carbon contentLow carbon steel: 0.05 to 0.25% carbon content around .
Medium carbon steel: 0.3-0.5% carbon content around with balanced
ductility and strength and good wear resistance.
High carbon steel:0.6 to 1.0% carbon content around, and it is very strong, used for springs, edged tools, and high-strength wires.
Ultra-high carbon steel: 1.25-2.0% carbon content around, and it
can be tempered to great hardness.Carbon steel plate is mainly used for building construction,
including shipbuilding, engineering machinery, bridge construction,
mining machinery,coal mining machinery,railway
construction,construction,highway construction,chemical plant
construction,power station,wind power generation,etc.
| Item | Carbon structural steel plate |
| Introduction | Carbon structural steel plate refers to carbon steel with less than
0.8% carbon. This kind of steel contains less sulfur, phosphorus
and non-metallic inclusions than carbon structural steel, and has
better mechanical properties. Carbon structural steel can be
divided into three categories according to different carbon
content: low carbon steel (C≤0.25%), medium carbon steel (C is
0.25-0.6%) and high carbon steel (C>0.6%). |
| According to different manganese content, carbon structural steel
is divided into two groups: normal manganese content (manganese
0.25%-0.8%) and higher manganese content (manganese 0.70%-1.20%).
The latter has better mechanical properties. And processing
performance. |
| Standard | ASTM, DIN, ISO, EN, JIS, GB, etc. |
| Material | A36,A53, A283-D, A135-A, A53-A, A106-A, A179-C, A214-C, A192, A226,
A315-B, A53-B,A106-B, A178-C, A210-A-1, A210-C, A333-1.6, A333-7.9,
A333-3.4, A333-8, A334-8, A335-P1, A369-FP1, A250-T1, A209-T1,
A335-P2, A369-FP2, A199-T11, A213-T11, A335-P22, A369-FP22,
A199-T22, A213-T22, A213-T5, A335-P9, A369-FP9, A199-T9, A213-T9,
523M15, En46, 150M28, 150M19, 527A19, 530A30, etc. |
| Size | Length: 1m-12m, or as required |
| Width: 0.6m-3m, or as required |
| Thickness: 0.1mm-300mm, or as required |
| Surface | Clean, blasting and painting according to customer requirement. |
| Application | There are many uses and a large amount. It is mainly used in
railways, bridges, and various construction projects to manufacture
various metal components that bear static loads, as well as
unimportant mechanical parts and general welded parts that do not
require heat treatment. Usually used for welding, riveting, and
bolting hot-rolled steel plates, steel strips, section steels and
steel bars for engineering structures. |
| Certificates | ISO, SGS, BV. |
| Package | Standard export package, or as required. |
| Price term | FOB, CIF, CFR, CNF, Ex-work |
| Payment | T/T, L/C, Western Union, etc. |
| Delivery time | Within 7-15 workdays after receiving deposit or L/C |
| Container size | 20ft GP: 5898mm(Length)x2352mm(Width)x2393mm(High) 24-26CBM |
| 40ft GP: 12032mm(Length)x2352mm(Width)x2393mm(High) 54CBM |
| 40ft HC: 12032mm(Length)x2352mm(Width)x2698mm(High) 68CBM |
| Carbon content (wt.%) | Microstructure | Properties | Examples | |
| Low-carbon steel | < 0.25 | Ferrite, pearlite | Low hardness and cost. High ductility, toughness, machinability and
weldability | AISI 304, ASTM A815, AISI 316L |
| Medium-carbon steel | 0.25 - 0.60 | Martensite | Low hardenability, medium strength, ductility and toughness | AISI 409, ASTM A29, SCM435 |
| High-carbon steel | 0.60 - 1.25 | Pearlite | High hardness, strength, low ductility | AISI 440C, EN 10088-3 |
| Material | China | Former
Soviet Union | America | England | Japan | French |
| GB | ГOCT | ASTM | BS | JIS | NF |
| High Quality Carbon Structural Steel | 08F | 08KП | 1006 | 040A04 | S09CK | |
| 8 | 8 | 1008 | 045M10 | S9CK | |
| 10F | | 1010 | 040A10 | | XC10 |
| 10 | 10 | 10,101,012 | 045M10 | S10C | XC10 |
| 15 | 15 | 1015 | 095M15 | S15C | XC12 |
| 20 | 20 | 1020 | 050A20 | S20C | XC18 |
| 25 | 25 | 1025 | | S25C | |
| 30 | 30 | 1030 | 060A30 | S30C | XC32 |
| 35 | 35 | 1035 | 060A35 | S35C | XC38TS |
| 40 | 40 | 1040 | 080A40 | S40C | XC38H1 |
| 45 | 45 | 1045 | 080M46 | S45C | XC45 |
| 50 | 50 | 1050 | 060A52 | S50C | XC48TS |
| 55 | 55 | 1055 | 070M55 | S55C | XC55 |
| 60 | 60 | 1060 | 080A62 | S58C | XC55 |
| 15Mn | 15Г | 10,161,115 | 080A17 | SB46 | XC12 |
| 20Mn | 20Г | 10,211,022 | 080A20 | | XC18 |
| 30Mn | 30Г | 10,301,033 | 080A32 | S30C | XC32 |
| 40Mn | 40Г | 10,361,040 | 080a40 | S40C | 40M5 |
| 45Mn | 45Г | 10,431,045 | 080A47 | S45C | |
| 50Mn | 50Г | 10,501,052 | 030A52
080M50 | S53C | XC48 |
| Grade | Standard | Chemical Composition | Deoxygenation Method | | | | |
| C | Mn | Si | S | P | | | |
| ≤ | | | | | | | |
| Q195 | - | 0.06~0.12 | 0.25~0.50 | 0.3 | 0.05 | 0.045 | F,b,Z |
| Q215 | A | 0.09~0.15 | 0.25~0.55 | 0.3 | 0.05 | 0.045 | F,b,Z |
| B | 0.045 | F,b,Z | | | | | |
| Q235 | A | 0.14~0.22 | 0.30~0.65 | 0.3 | 0.05 | 0.045 | F,b,Z |
| B | 0.12~0.20 | 0.30~0.70 | 0.045 | | | | |
| C | ≤0.18 | 0.35~0.18 | 0.04 | 0.04 | Z | | |
| D | ≤0.17 | 0.035 | 0.035 | TZ | | | |
| Q255 | A | 0.18~0.28 | 0.40~0.70 | 0.3 | 0.05 | 0.045 | F,b,Z |
| B | | 0.045 | | | | | |
| Q275 | - | 0.28~0.38 | 0.50~0.80 | 0.35 | 0.05 | 0.045 | b,Z |
| Item | Material | Thickness (mm) | Width (mm) | Length (mm) |
| MS Hot Rolled Steel Plate | Q235 SS400 A36 | 6-25 | 1500 - 2500 | 4000 - 12000 |
| EN10025 HR Steel Plate | S275 / S275JR ,S355/S355 JR | 6-30 | 1500 - 2500 | 4000 - 12000 |
| Boiler Steel Plate | Q245R , Q345RA516 Gr.60 , A516 Gr.70 | 6-40 | 1500-2200 | 4000 - 12000 |
| Bridge Steel Plate | Q235, Q345, Q370, Q420 | 1.5-40 | 1500-2200 | 4000 - 12000 |
| Ship-building Steel Plate | CCSA/B/C/D/E, AH36 | 2-60 | 1500-2200 | 4000 - 12000 |
| Wear Resistant Steel Plate | NM360, NM400, NM450, NM500, NM550 | 6-70 | 1500-2200 | 4000 - 8000 |
| Corten Steel Plate | SPA-H, 09CuPCrNiA, Corten A | 1.5-20 | 1100-2200 | 3000 - 10000 |
| AUGE | steel | Galvanized steel | Stainless steel | aluminum | Electrical steel |
|
| (Ga.) |
| in (mm) | in (mm) | in (mm) | in (mm) | in (mm) |
| 3 | 0.2391 (6.07) | - | - | - | - |
| 4 | 0.2242 (5.69) | - | - | - | - |
| 6 | 0.1943 (4.94) | - | - | 0.162 (4.1) | - |
| 7 | 0.1793 (4.55) | - | 0.1875 (4.76) | 0.1443 (3.67) | - |
| 8 | 0.1644 (4.18) | 0.1681 (4.27) | 0.1719 (4.37) | 0.1285 (3.26) | - |
| 9 | 0.1495 (3.80) | 0.1532 (3.89) | 0.1563 (3.97) | 0.1144 (2.91) | - |
| 10 | 0.1345 (3.42) | 0.1382 (3.51) | 0.1406 (3.57) | 0.1019 (2.59) | - |
| 11 | 0.1196 (3.04) | 0.1233 (3.13) | 0.1250 (3.18) | 0.0907 (2.30) | - |
| 12 | 0.1046 (2.66) | 0.1084 (2.75) | 0.1094 (2.78) | 0.0808 (2.05) | - |
| 13 | 0.0897 (2.28) | 0.0934 (2.37) | 0.094 (2.4) | 0.072 (1.8) | - |
| 14 | 0.0747 (1.90) | 0.0785 (1.99) | 0.0781 (1.98) | 0.0641 (1.63) | - |
| 15 | 0.0673 (1.71) | 0.0710 (1.80) | 0.07 (1.8) | 0.057 (1.4) | - |
| 16 | 0.0598 (1.52) | 0.0635 (1.61) | 0.0625 (1.59) | 0.0508 (1.29) | - |
| 17 | 0.0538 (1.37) | 0.0575 (1.46) | 0.056 (1.4) | 0.045 (1.1) | - |
| 18 | 0.0478 (1.21) | 0.0516 (1.31) | 0.0500 (1.27) | 0.0403 (1.02) | - |
| 19 | 0.0418 (1.06) | 0.0456 (1.16) | 0.044 (1.1) | 0.036 (0.91) | - |
| 20 | 0.0359 (0.91) | 0.0396 (1.01) | 0.0375 (0.95) | 0.0320 (0.81) | - |
| 21 | 0.0329 (0.84) | 0.0366 (0.93) | 0.034 (0.86) | 0.028 (0.71) | - |
| 22 | 0.0299 (0.76) | 0.0336 (0.85) | 0.031 (0.79) | 0.025 (0.64) | 0.0310 (0.787) |
| 23 | 0.0269 (0.68) | 0.0306 (0.78) | 0.028 (0.71) | 0.023 (0.58) | 0.0280 (0.711) |
| 24 | 0.0239 (0.61) | 0.0276 (0.70) | 0.025 (0.64) | 0.02 (0.51) | 0.0250 (0.64) |
| 25 | 0.0209 (0.53) | 0.0247 (0.63) | 0.022 (0.56) | 0.018 (0.46) | 0.0197 (0.50) |
| 26 | 0.0179 (0.45) | 0.0217 (0.55) | 0.019 (0.48) | 0.017 (0.43) | 0.0185 (0.47) |
| 27 | 0.0164 (0.42) | 0.0202 (0.51) | 0.017 (0.43) | 0.014 (0.36) | - |
| 28 | 0.0149 (0.38) | 0.0187 (0.47) | 0.016 (0.41) | 0.0126 (0.32) | - |
| 29 | 0.0135 (0.34) | 0.0172 (0.44) | 0.014 (0.36) | 0.0113 (0.29) | 0.0140 (0.35) |
| 30 | 0.0120 (0.30) | 0.0157 (0.40) | 0.013 (0.33) | 0.0100 (0.25) | 0.011 (0.27) |
| 31 | 0.0105 (0.27) | 0.0142 (0.36) | 0.011 (0.28) | 0.0089 (0.23) | 0.0100 (0.25) |
| 32 | 0.0097 (0.25) | - | - | - | - |
| 33 | 0.0090 (0.23) | - | - | - | 0.009 (0.23) |
| 34 | 0.0082 (0.21) | - | - | - | - |
| 35 | 0.0075 (0.19) | - | - | - | - |
| 36 | 0.0067 (0.17) | - | - | - | 0.007 (0.18) |
| 37 | 0.0064 (0.16) | - | - | - | - |
| 38 | 0.0060 (0.15) | - | - | - | 0.005 (0.127) |
Due to the many great features of stainless steel, it is widely
used in many industries. It includes constructions, home
appliances, automobiles, kitchen accessories, mechanical structure,
decoration engineering, chemical industry, etc. Let's have a brief
review.
1. Construction & Buildings
It is an essential building material widely used in commercial
buildings, bridges, airports, etc. The most common uses include
structural frames, roofing, wall panels, claddings, door panels,
backsplash, handrailings, ceilings, elevator hall, inner panels of
elevators, etc. Also, it is perfect for making handicrafts.
2. Automobile
Different grades of stainless steel can be used to manufacture car
bodies, grills, trims, wheel axles, bearings, vehicular exhaust,
fuel tanks, etc.
3. Industrial Uses
Stainless steel is ideal for transporting chemicals, liquids, etc.
It is typical for medical uses, gas and oil industries, such as
pipelines and tubes, blades, operation tables, pumps, processing or
storage tanks & vessels, etc.
4. Household Appliances
About 75% of household appliances are made of stainless steel,
including internal panels of cookers, heaters, ovens, burners,
conveyors, grills, television, washing machine, refrigerator,
kitchen hardware, etc.
5. Furniture & Daily Uses
Stainless steel coil and sheet are also versatile in our daily
life, such as trash cans, screens, benches, tables, beds,
bookshelves, advertising boards, display stands, etc.
